System-Time Manual; System-Time Dst - TP-Link TL-SG5412F Reference Manual

Parameter
time-zone —— Your local time-zone, and it ranges from -12 to 13.
ntp-server —— The IP Address for the Primary NTP Server.
Backup-ntp-server —— The IP Address for the Secondary NTP Server.
Command Mode
Global Configuration Mode
Example
Configure the system time mode as gmt, the time zone is -12, the primary ntp
server is 133.100.9.2 and the secondary ntp server is 139.78.100.163:
TP-LINK(config)# system-time gmt -12 133.100.9.2 139.78.100.163

system-time manual

Description
The system-time manual command is used to configure the system time
manually.
Syntax
system-time manual {time}
Parameter
time —— Set the date and time manually, MM/DD/YYYY-HH:MM:SS
Command Mode
Global Configuration Mode
Example
Configure the system mode as manual, and the time is 12/20/2010 17:30:35
TP-LINK(config)# system-time manual 12/20/2010-17:30:35

system-time dst

Description
The system-time dst command is used to configure the DST (Daylight Saving
Time). To clear all the information, please use no system-time dst command.
Syntax
system-time dst {start-date} {start-time} {end-date} {end-time}
no system-time dst
106