Chapter 8: Intel ® Raid Web Console 2; Configuration Functions; Monitoring Functions - Intel AFCSASRISER User Manual

8
Intel
The Intel
RAID controllers and the storage-related devices connected to the RAID controller. The Intel
RAID Web Console 2 graphical user interface (GUI) makes it easy to create and manage
storage configurations.
Note: Depending on different version of Intel(R) RAID Web Console 2, the actual screen displayed could
be different from this section. This section is for reference only.

Configuration Functions

The Intel
backup units, and other storage-related devices installed on a system.
•
•
•
•
•

Monitoring Functions

The Intel
disks, and other storage-related devices on the systems you are monitoring. System errors and
events are recorded in an event log file and displayed on the screen. Special device icons
appear on the screen to notify you of disk failures and other situations that require immediate
attention.
®
Note: Intel RAID Web Console 2 "Client Only" Installation type on the Client system doesn't support
configuring email/alerting settings on local system. Necessary settings for local system need to be
configured locally.
®
Intel RAID Software User's Guide
®
RAID Web Console 2
®
RAID Web Console 2 enables you to configure, monitor, and maintain Intel
®
RAID Web Console 2 enables you configure the controllers, disk drives, battery
The Configuration Wizard simplifies the process of creating disk groups and virtual
drives.
Auto Configuration mode automatically creates the best possible configuration for the
available hardware.
Note: Auto Configuration cannot be used for RAID 10, 50, or 60 or with mixed SATA and
SAS drives.
Guided Configuration mode asks you a few brief questions about the configuration, and
then creates the array for you.
Manual Configuration mode gives you complete control over all aspects of the storage
configuration.
The Reconstruction Wizard enables you to increase or reduce the size of a virtual drive
and to change the RAID level of an array.
®
RAID Web Console 2 displays information on the status of virtual drives, physical
®
®
87