Detailed Configuration Steps using the Intel
Console 2
®
Start the Intel
Note: If there is a configuration mismatch between the disks and the NVRAM, the utility automatically
displays the Select Configuration screen. Choose whether the configuration should be read from the
RAID array or from NVRAM. For more information, see
page
68.
Screen and Option Descriptions
This section describes the Intel
Toolbar Options
Table 13
Table 13. Intel
62
RAID BIOS Console 2 Utility
1. When the system boots, hold down the <Ctrl> key and press the <G> key when the
following is displayed:
Press <Ctrl><G> to enter the RAID BIOS Console
After you press <Ctrl>+<G>, the Controller Selection screen appears.
2. Select a controller and click Start to begin the configuration.
describes the Intel
®
RAID BIOS Console 2 Toolbar
Icon Descriptions
Icon
Return to the main screen.
Return to the page you accessed immediately
before the current page.
®
Exit the Intel
RAID BIOS Console 2 utility.
Silence the alarm.
®
RAID BIOS Console 2 screens and options.
®
RAID BIOS Console 2 toolbar icons.
Description
®
RAID BIOS
"Configuration Mismatch Screen" on
®
Intel
RAID Software User's Guide