Introduction; To Set Up Intel It Director; See Also - Intel IT DIRECTOR Manual

Introduction

Intel® IT Director enables you to configure and monitor system protection for
computers in your network. It enables you to
up to two subnetworks
Before using Intel IT Director, configure your system as explained in the Getting
Started Guide.

To set up Intel IT Director:

1. On each computer,
2. On each computer,
3. From computers you will use to monitor the network,
network.
Once you finish these steps, you can start
The Intel IT Director interface includes the following tabs:
• My Computer. Configure protection and monitoring on client computers.
• My Network. Monitor your network.
• Settings. Set user privileges, disable My Computer settings, and configure
your network.
For support and more information about Intel IT Director, see
http://support.intel.com/support/go/itdirector.htm.

See Also

Getting Started Guide
Setting User Privileges
Monitoring Your Network: Overview
Configuring Your Network: Overview
Configuring Your Computer: Overview
Blocking USB Devices: Overview
Configuring the Power-On Monitor
Troubleshooting
(subnets).
set user privileges
configure Intel IT Director settings for that computer.
monitoring your
monitor up to 25 client computers
on Intel IT Director.
configure your
network.
on
3