Battery Learn Cycle; Figure 86. Battery Backup Unit Information - Intel AFCSASRISER User Manual

The BBU properties include the following:

Battery Learn Cycle

Learn Cycle is a battery calibration operation performed by the controller periodically to
determine the condition of the battery. You can start battery learn cycles manually or
automatically. To choose automatic battery learn cycles, enable automatic learn cycles. To
choose manual battery learn cycles, disable automatic learn cycles.
If you enable automatic learn cyles, you can delay the start of the learn cycles for up to 168
hours (7 days). If you disable automatic learn cycles, you can start the learn cycles manually,
and you can choose to receive a reminder to start a manual learn cycle.
Setting Learn Cycle Properties
To set the learn cycle properties, perform the following steps:
®
Intel RAID Software User's Guide

Figure 86. Battery Backup Unit Information

•
The number of times the BBU has been recharged (Cycle Count)
•
The full capacity of the BBU, plus the percentage of its current state of charge, and the
estimated time until it will be depleted
•
The current BBU temperature, voltage, current, and remaining capacity
•
If the battery is charging, the estimated time until it is fully charged
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
135