Changing Virtual Disk Properties; Figure 73. Changing Raid Level - Intel AFCSASRISER User Manual

Changing Virtual Disk Properties

You can change a virtual disk's Read Policy, Write Policy, and other properties after the disk is
created. To do this, follow these steps:
122
5. When everything is acceptable, click Finish to accept the new configuration.
A Reconstruct operation begins on the virtual disk. You can monitor the progress of the
reconstruction in the Group Show Progress window. Select Manage -> Show Progress.
1. Select a virtual disk (or drive) icon in the left panel and then select Go To -> Virtual
Drive -> Set Virtual Drive Properties. Alternatively, click the Properties panel and
then click Set Virtual Disk Properties.
screen.

Figure 73. Changing RAID Level

Figure 74 shows the Set Virtual Disk Properties
®
Intel RAID Software User's Guide