Chapter 1. General Description; Specifications - Sharp FO-3150 Service Manual

CHAPTER 1. GENERAL DESCRIPTION

[1] Specifications

1 GENERAL
Automatic dialing Rapid Key Dialing: 10 numbers
Speed Dialing: 99 numbers
Memory size* 1.8 MB (approx. 100 average pages)
Modem speed 14,400 bps with auto fallback to lower speeds.
Transmission time* Approx. 6 seconds (only when ECM is on)
Toner cartridge yield** Initial starter cartridge (included with fax machine):
(continuous printing, Approx. 1,800 pages
4% page coverage, Replacement cartridge FO-29ND: Approx. 3,700
letter paper) pages
Drum cartridge yield** Initial starter cartridge (included with fax machine):
(continuous printing, Approx. 20,000 pages
4% page coverage, Replacement cartridge (FO-29DR): Approx. 20,000
letter paper) pages
Scanning Resolution Horizontal: 203 lines/inch (8 lines/mm)
Vertical:
Standard: 98 lines/inch (3.85 lines/mm)
Fine /Halftone: 196 lines/inch (7.7 lines/mm)
Super fine: 391 lines/inch (15.4 lines/mm)
Automatic document Letter/A4: 20 pages max. (20-lb. paper)
feeder Legal: 5 pages max.
Recording system Laser
Compatibility ITU-T (CCITT) G3 mode
Paper tray capacity
Letter: Approx. 200 sheets of 20-lb.
copier paper, or 180 sheets of 21.5-lb.
copier paper (at room temperature; maximum
stack height should not be higher than the line on
the tray)
Legal: 100 sheets
Recommended paper weight: 20-lb. Copy Bond
Halftone (grayscale) 64 levels
Compression scheme MR, MH, MMR
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some
deviation from these values in individual units.
2 Life of consumable
Section
Toner cartridge
Drum cartridge
Paper feed
Fuser
Paper transport
Unit
(70 g/m
(80 g/m
Part
Replacement cartridge
(FO-29ND)
Replacement cartridge
(FO-29DR)
Transfer roller (Refer to the P/G No. 8-25)
(NROLP7046XCZZ)
Fusing unit (Refer to the P/G No. 9-901)
(DUNTW495CSC01)
Feed roller (Refer to the P/G No. 1-30)
(NROLR2333XHZZ)
FO-3150
Input document size
Effective scanning width 8.3" (210 mm) max.
Effective printing width
Contrast control
Reception modes
Copy function
Telephone function
Applicable telephone line Public switched telephone network
Display
Power requirements
Operating temperature
Humidity
Power consumption
Dimensions (without
attachments)
2
)
2
)
Weight (without
attachments)
Important:
• This fax machine is not designed for use on a line which has call
waiting, call forwarding, or certain other special services offered by
your telephone company. If you attempt to use the fax machine in
conjunction with any of these services, you may experience errors
during transmission and reception of facsimile messages.
• This fax machine is not compatible with digital telephone systems.
Estimated Life
3,700 prints
(at Letter/4% chart)
20,000 prints
(at Letter/4% chart)
5 years
5 years
Cleaning as needed
5 years or 30,000 prints
of early either
1 – 1
FO-3150U/C
Automatic feeding:
Width: 5.8 to 8.5" (148 to 216 mm)
Length (20 pages): 5.5 to 11.7" (140 to 297 mm)
Length (5 pages): 5.5 to 14" (140 to 356 mm)
Manual feeding:
Width: 5.8 to 8.5" (148 to 216 mm)
Length: 5.5 to 23.6" (140 to 600 mm)
8.2" (208 mm) max.
Automatic/Dark selectable
TEL/FAX/AM
Single/Multi/Sort (50 copies/page)
Yes (cannot be used if power fails)
16-digit LCD display
120 V AC, 60 Hz
50 - 86 F (10 - 30 C)
20 - 85% RH
Standby: 6.0 W
Maximum: 650 W
Width: 14.6" (372 mm)
Depth: 10.2" (259 mm)
Height: 8.0" (203 mm)
Approx. 11 lbs. (5.0 kg)
Replaced by
User
User
Service Engineer
Service Engineer
———————
———————