Sharp FO-3150 Service Manual page 10

FO-3150U/C
3) Attach the received document tray.
4) Attach the original document support.
Make sure that the
flanges face up
5 Extension phone (optional)
If desired, you can connect an extension phone to the TEL. SET
jack on the fax.
1) Remove the seal covering the TEL. SET socket.
2) Connect the extension phone line to the TEL. SET socket.
5. Loading Printing Paper
You can load up letter, A4 or legal paper in the paper tray.
• Up to 200 sheets of 20 lb. (70 g/m
• Up to 180 sheets of 21.5 lb. (80 g/m
Caution!
Do not use the blank side of paper that has already been printed on.
1 Remove the paper tray cover.
2 If you are going to load legal size paper, flip up the paper tray
extension and extend the paper tray cover.
3 Fan the paper, and then tap the edge against a flat surface to
even the stack.
4 Pull the paper release lever toward you.
5 Insert the stack of paper firmly into the tray, print side up.
• Make sure that the stack is not higher than the marked line.
Loading too much paper may cause paper jams and misfeeds.
• If paper remains in the tray, take it out and combine it into a
single stack with the new paper before adding the new paper.
Important:
Be sure to load the paper so that printing takes place on the
print side of the paper. Printing on the reverse side may result in
poor print quality.
1 – 8
2
) paper can be loaded.
2
) paper can be loaded.