Lock Lever; Right Fan; Separate Nails - Sharp FO-3150 Service Manual

FO-3150U/C

15. Lock lever

1 Remove connectors, and remove the cables from fusing gear cover.
2 Remove two screws, and remove fusing gear cover.
3 Remove lock lever spring, and pull out lock lever from the upper
frame.
1
Fig. 23

16. Right fan

1 Remove four screws, and remove right fan and fan bracket.
Developer drive
gear A
Fusing clutch spring
Fusing clutch gear A
1
Right fan
Fan bracket
Fig. 24
Lock lever spring
3
1
Tray lock
lever
1
Fusing
gear cover
2
Motor idle gear
Gear plate
1
17. Fusing unit
1 Remove connectors.
2 Release the protect of the cable connected to 1 from the lower frame.
3 Remove two fixing screws of fusing harness (white, black).
Power Thermal fuse (upper)
100V series
4 Remove two screws of the fusing section.
5 Pull out the fusing unit.
Note for assembly
• When attaching the fusing harness, be careful to the color and do not
attach reversely.
Fusing harness
(Black)
3
Fusing harness
(White)
4
Fusing unit
5
1

18. Separate nails

1 Remove four springs and remove four separate nails.
1
3 – 20
Heater lamp (lower)
Black White
4
2
1
Fig. 25
Separate nails
1
Separate nails
1
Fig. 26
1