Stationary L-Bracket Rail Assembly; Identifying Approved Non-E-Series Hp Cabinets - HP L1000 - 9000 - 0 MB RAM Installation Manual

Server Unpacking and Installation

Stationary L-Bracket Rail Assembly

Stationary L-Bracket Rail Assembly
rp54xx Servers may be installed into E-Series and approved Non- E-Series cabinets using stationary
L-bracket rail assembly kits listed below.
NOTE rp54xx Servers are supported in Hewlett-Packard E-series and approved Non- E-series
Hewlett-Packard cabinets, and approved rail kits.
For information on additional qualified 3rd party cabinets and rail kits, contact the nearest
Hewlett-Packard Response Center.
Cabinet Type
E-Series HP Cabinet
Other Approved HP Cabinet

Identifying Approved Non-E-Series HP Cabinets

Approved Non- E-Series cabinets have black frames, one piece outside sheet metal skins, a partial return
flange, and requires the installation of the aluminum spacer blocks, supplied with the rail kits.
Approved Non- E-Series cabinets include the following product numbers: A1883A, A1884A, A1896A, A1897A,
C1897A, C2785A, C2786A, and C2787A.
48
Rail Kit Product Number
A5575A
A5562A
Chapter 2