HP L1000 - 9000 - 0 MB RAM Installation Manual page 72

Cabling and Power-Up
Secure Web Console Installation
Place the Secure Web Console power supply into the bottom portion of the wire mounting bracket
as shown.
Step 2. Connect one end of the power cable to the power supply where indicated.
Step 3. Position the Secure Web Console unit in the mounting bracket.
Step 4. Connect the DC out cable from the power supply to the Secure Web Console.
Step 5. Connect one end of the AC power cord (supplied) to the Secure Web Console power supply.
Step 6. Connect the other end of the AC power cord to an available receptacle.
On a PDU if in a cabinet.
In an available wall outlet if in a Deskside enclosure.
72
Chapter 3