Gsp Configurable Parameters; Adding Users - HP L1000 - 9000 - 0 MB RAM Installation Manual

Cabling and Power-Up

GSP Configurable Parameters

GSP Configurable Parameters
Once a system console is configured, additional GSP parameters may be set. For a complete list use the
GSP>he command to access the on-line help facility.
Examples of three configurable parameters follow.

Adding Users

The GSP provides a maximum of 20 users (one administrator and 19 operators). By design, the first user
added to the GSP becomes the GSP administrator. Only the GSP administrator can add or remove users or
change the GSP configuration.
NOTE Before starting this procedure, you will need to know the following information:
• User's name
• Organization's name
• Login name
• User's password
To add a user, perform the following steps:
1. Access the GSP with the ctrl+b entry.
2. At the GSP prompt, enter the Security options and access control (SO) command:
GSP> so
3. The first prompt you will see with the so command is for GSP wide parameters:
GSP wide parameters are:
Login Timeout: 1 minutes.
. Number of password Faults allowed: 3
. Flow Control Timeout: 5 minutes.
Do you want to modify the GSP wide parameters? (Y / N) __
At this point you can modify the GSP wide parameters, or continue with adding users. To add users,
respond N for no.
NOTE If this is the first time users are being added, the first user added will be the GSP
administrator.
If this is not the first time you are adding users (you are adding additional users), you will
need to step through all current users to reach the next available user prompt.
4. The next prompt that appears will ask the following question:
Do you want to modify the user number 1 parameters? (Y/N/Q to quit) __
Follow the series of prompts to enter all the required fields for adding a user.
74
Chapter 3