HP L1000 - 9000 - 0 MB RAM Installation Manual page 19

Product
Description (all are PCI cards)
Number
J3525A Dual Port Synchronous Adapter
J3593A 64 port Serial MUX system card
J3592A 8 Port PCI Serial MUX card
A6150A Graphics, USB Card
A6150BX Pinnacle 2 Graphics
A6386A Hyper Fabric 2 Interconnect
A5506A Quad Port 10/100B-TX LAN
A6749A 3.3v 64 Port Terminal MUX
A6748A 3.3v 8 Port Terminal MUX
*In top down order.
Notes:
1. Card contains a PCI-to-PCI bridge.
2. Requires PHKL_20123, PHKL_20629 and PHNE_19826 or their superseded equivalents.
3. Not supported in non-turbo slots. Install in turbo slots only.
4. Requires server firmware revision 39.46 or later.
5. Requires HP-UX 11.1
6. Maximum is 7 for HP-UX versions prior to 11.0. Maximum is 10 for HP-UX version 11.1 and later.
7. Requires PHKL_19543 and PHKL_19544 or their superseded equivalents.
8. Requires HP-UX 11.0 Support Plus (IPR) 0006, June 2000 or later. This product to be released 6/00.
9. Not supported in a shared slot (slots 3-4 for rp5470, slots 3-6 for rp5450, not applicable for rp5400).
10. If you are installing ATM 622 cards in an rp5470 configuration, do not install them in slots 3 and 4
(shared slots).
11. Requires 768 MB for first card and 512 MB for each additional card.
12. Not supported in shared slots.
13. Max of 1. Needs USB card for keyboard and mouse.
14. Contains PCI bridge.
Chapter 1
Installing Peripheral Component Interconnect (PCI) Cards
Load
Max Boot Order
*
10 No 19
10 No 20
4 No 21
1 No 22
1 No 1
10 No 6
10 No 10
10 No 24
10 No 25
Installing Additional Components
Part
Notes
Number
J3525-60001
J3593-60001
J3592-60101
A6150-60001
A6150-60003 12,13
A3686-60001
A5506-60102 14
A6749-60001
A6748-60001
19