Setting The Sewing Pattern - Brother Z-8550A Instruction Manual

6-2-2. Setting the sewing pattern

[1] Plain zigzag
[2] 2-step zigzag
[3] 3-step zigzag
[4] Straight stitching
Note:
If the needle bar is at the needle up stop position, the needle bar will move to the sewing start position when the sewing
pattern settings are changed.
If the needle bar is not at the needle up stop position, the needle bar will move to the sewing start position after it next
moves to the needle up stop position.
6. USING THE OPERATION PANEL (BASIC OPERATIONS)
Press the sewing pattern select keys ([1] to [7] in the
illustration left) to select the sewing pattern. The indicator for
the key that was pressed will illuminate and the pattern
number that has been set for that key will appear in the main
display .
* When a sewing pattern has been set, be sure to set the
zigzag width. (Refer to page 31.)
3414M
Z-8550A, 8560A
3415M
3416M
3417M
3418M
26