Brother Z-8550A Instruction Manual page 19

4. INSTALLATION
(2) 4-pin motor connector
(3) 5-pin zigzag motor connector
(4) 7-pin head detector unit connector
(5) 14-pin machine connector
(6) 14-pin encoder connector
(7) 8-pin operating panel connector
(8) 5-pin zigzag motor encoder connector
(9) 3-pin DC fan connector (oil pan)
Close
11
Connector
Tighten
Loosen as much as
possible.
<Removal>
Press the tab.
P.C. board indication
Outside of control box
P5 PM
P6 HEAD-M
P19 MACHINE
P13 ENC
P21 PANEL
P3 NDL_ENC
P32 FAN2
2. Closing the cord presser plate
(1) Cord presser plate
NOTE:
• Loosen the cables outside the control box without
stretching them too much inside the control box.
• If the cord presser plate (1) is not closed firmly, dust
will get inside the control box and may cause
problems.
3368M
Z-8550A, 8560A
Push in securely until
the tabs (16) engage.
Ground symbol
<Securing>
Insert firmly until a click is heard.
Cord clamp
(10)
(10) (12) (14) (15)
(11) (13)
(10) (12)
(10) (12) (14) (15)
(10)
(11) (13) (14) (15)
3369M