Adjusting The Presser Foot Pressure - Brother Z-8550A Instruction Manual

Electronic direct drive zigzag lock stitcher

Hide thumbs Also See for Z-8550A:

Table of Contents

9-2. Adjusting the presser foot pressure

Correct stitches

Becomes weaker

0578M

Skipped stitches occur

Uneven stitch length

0579M

Stitches are puckered

0580M

Becomes stronger

3473M

Z-8550A, 8560A

Increase the pressure.

Decrease the pressure.

The presser foot pressure should be as weak as possible,

but strong enough so that the material does not slip.

1. Loosen the adjusting nut (1).

2. Turn the presser adjusting screw (2) to adjust the

presser foot pressure.

3. Tighten the adjusting nut (1).

9. THREAD TENSION

Table of Contents

Show Quick Links

Table of Contents

Z-8560a