Brother ZE-855A Manual

ZE-855A
ZE-856A
Electronic single needle zigzag lock stitcher
Electronic single needle zigzag lock stitcher
with thread trimmer
Use
Maximum stitch length
Max. sewing speed
Sewing pattern
Max. zigzag width
Thread take-up lever
Needle bar stroke
Feed dog height
Presser bar lifter
Presser
foot Knee lifter
height
Automatic
Presser foot pressure
Needle
Motor
Power supply
*1......Used for sewing condensed stitches and back tack stitches.
*2......If fine adjustments to the stitch length are needed, use" General(foundation)".
*3......At the time of shipment from the factory, the maximum sewing speed is set to 4,500 rpm. If you would like to sew at speeds higher than
this, change the setting of the DIP switch inside the control box. Furthermore, the maximum sewing speed may be limited by the type of
sewing pattern and the zigzag width.
*4......The maximum number of custom-made patterns that can be stored is 99 patterns with a total of 10,000 stitches, at 500 stitches or less
per pattern.
*5......If you would like to reduce the pressure of the presser foot (such as when sewing light-weight materials), replace the compression spring
with the accessory spring.
Thread trimmer
Upper thread feeding device
Back tack/condense device *1
Thread wiper
Automatic presser foot lifter
855A
General General
(foundation) (long stitch)*2
-□01 -□03
For light-weight materials-medium-weight materials
2.5 mm 5 mm
(Up to 99 different types of custom-made patterns can be added *4)
20-60N *5 20-60N
Three-phase 400 W induction motor
Single-phase
3-phase
Maximum electric power consumption:600 VA
2002.7
855A
0 A
- -
- -
-
- -
- -
General
(foundation)
-□01
2.5 mm
5,000 rpm*3
14 patterns of 8 types built-in
10 mm(Factory default 8 mm)
Rotary thread take-up
33.3 mm
1 mm
6 mm
10 mm
20-60N *5
Schmets
SY 1965 Nm 70/10
110V, 220V, 230V
220V, 240V, 380V, 400V
856A
3 4 9
Solenoid
Solenoid
Solenoid
-
Solenoid
- - Solenoid
856A
General
(long stitch)*2
-□03
5 mm
7 mm
20-60N
ZE-855A，856A 1/16