Adf - Canon PC920 Service Manual

CHAPTER 11 TROUBLESHOOTING
B.

ADF

1. Adjusting the Original Stop Position
Adjust the original stop position in the following order:
1. Correcting original skew
2. Adjusting the rear/front original stop position
3. Adjusting the original leading edge stop position
2. Correcting Original Skew
1) Obtain a sheet of A4 or LTR white copy paper, and draw two lines as indicated.
• The sheet will be used as a test sheet.
2) Turn on the machine, and place the test sheet prepared in step 1) on the original tray.
11-30
10mm
Figure 11-244
Figure 11-245
COPYRIGHT © 1999 CANON INC.
A4/LTR copy papper
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)