Canon PC920 Service Manual page 246

CHAPTER 9 INSTALLATION
Step
6 Open the copyboard cover, and remove the
protective sheet. (Copyboard type only)
Caution:
If the protective sheet is not fond on the ma-
chine, go to the next step.
Open the ADF, and remove the protective
members. (ADF type only)
Caution:
You will need this protective member when
relocating the machine. Be sure to store it
away appropriately.
Pull the open/close lever found on the left of
7
the machine to open the machine's top unit;
then, remove the two protective members.
Caution:
If the protective member is not found on the
machine, go to the next step.
9-4
Work
COPYRIGHT © 1999 CANON INC.
Checks and remarks
Protective sheet
Protective member
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Protective members
Open/close lever