Canon PC920 Service Manual page 281

CHAPTER 11 TROUBLESHOOTING
2) Put the cable drive pulley [1] into the shaft [4], and secure it in position with an E-ring [5].
When putting the cable drive pulley into the shaft, be sure that the hook is at the front.
3) Hook the shorter end [6] on the pulley [7].
11-16
Figure 11-220
[7]
Figure 11-221
COPYRIGHT © 1999 CANON INC.
[5]
Hook
[1]
(front)
[4]
[6]
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)