Canon PC920 Service Manual page 297

CHAPTER 11 TROUBLESHOOTING
3. Adjusting the Rear/Front Original Stop Position
You must first correct original skew before adjusting the rear/front original stop position.
1) Obtain a sheet of A4 or LTR white copy paper, and draw two lines as indicated.
• The sheet will be used as a test sheet.
2) Remove the original tray cover from below the original tray.
11-32
10mm
Figure 11-248
Figure 11-249
COPYRIGHT © 1999 CANON INC.
A4/LTR copy papper
Original
tray cover
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)