Canon PC920 Service Manual page 91

5. Removing the Thermistor Unit
1) Remove the top cover.
(See Chapter 7.III.A.1. "Removing the
Top Cover.")
2) Disconnect the connector (J131) [1] from
the DC controller PCB; remove the screw
[2], and detach the thermistor unit [3].
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
[2]
[3]
[1]
Figure 3-353
3-41