Canon PC920 Service Manual page 245

Step
4 Remove the shipping attachment [2] (black
screw) from the right side of the machine.
5 Take out the protective member from the
manual feed tray. (Multifeeder type only)
Caution:
This step applies only if the manual feed tray
is attached.
Attach the manual feed tray that comes with
the machine. (Multifeeder type only)
Caution:
This applies only if the manual feed tray
comes packaged with the machine.
COPYRIGHT © 1999 CANON INC.
Work
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Checks and remarks
Shipping attachment [2]
You will be storing the shipping attachment
[2] inside the machine in step 9.
Protective member
Manual feed tray
9-3