Setting Up and Configuring the Router
Setup
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
Log Setting Status
E-mail
If this displays Email cannot be sent because you have not specified an
outbound SMTP server address, then you have not set up the mail server. Click
the E-mail hyperlink to display the Administration > Log window where you can
configure the SMTP mail server.
Setup > WAN
Internet Connection Type
The router supports six types of connections. Each Setup > WAN window and
available features will differ depending on what kind of connection type you
select.
Automatic Configuration - DHCP
By default, the router's Configuration Type is set to Automatic Configuration -
DHCP, and it should be kept only if your ISP supports DHCP or you are connecting
through a dynamic IP address.
Automatic Configuration - DHCP
Static IP
If your connection uses a permanent IP address to connect to the Internet, then
select Static IP.
5
28