Cisco QuickVPN - PC Administration Manual page 142

Using Cisco QuickVPN for Windows 2000, XP, or Vista
Using the Cisco QuickVPN Software
STEP 3
STEP 4
STEP 5
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
To save this profile, click Save. (If there are multiple sites to which you will need
to create a tunnel, you can create multiple profiles, but note that only one tunnel
can be active at a time.) To delete this profile, click Delete. For information, click
Help.
To begin your QuickVPN connection, click Connect. The connection's progress is
displayed: Connecting, Provisioning, Activating Policy, and Verifying Network.
When your QuickVPN connection is established, the QuickVPN tray icon turns
green, and the QuickVPN Status window appears. The window displays the IP
address of the remote end of the VPN tunnel, the time and date the VPN tunnel
began, and the total length of time the VPN tunnel has been active.
QuickVPN Status
To terminate the VPN tunnel, click Disconnect. To change your password, click
Change Password. For information, click Help.
If you clicked Change Password and have permission to change your own
password, you will see the Connect Virtual Private Connection window. Enter
your password in the Old Password field. Enter your new password in the New
Password field. Then enter the new password again in the Confirm New
Password field. Click OK to save your new password. Click Cancel to cancel your
change. For information, click Help.
B
135