Cisco QuickVPN - PC Administration Manual page 36

4-port gigabit security router with vpn
Hide thumbs Also See for QuickVPN - PC:
Table of Contents

Advertisement

Setting Up and Configuring the Router
Setup
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
Static IP
Internet IP Address
the Internet. Your ISP will provide you with the IP Address you need to specify
here.
Subnet Mask
This is the router's Subnet Mask, as seen by external users on the
Internet (including your ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway
Your ISP will provide you with the Default Gateway Address,
which is the ISP server's IP address.
Primary DNS (Required) and Secondary DNS (Optional)
you with at least one DNS (Domain Name System) Server IP Address.
When you have finished making changes, click Save Settings to save the
changes, or click Cancel Changes to undo your changes.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to
establish Internet connections. If you are connected to the Internet through a DSL
line, check with your ISP to see if they use PPPoE. If they do, you will have to
enable PPPoE.
This is the router's IP address, when seen from the WAN, or
5
Your ISP will provide
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Small business rvs4000

Table of Contents