Cisco QuickVPN - PC Administration Manual page 107

Using the VPN Setup Wizard
Running the VPN Router Software Wizard
STEP 7
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
Configure VPN Tunnel
•
Router 1 User Name: Enter the user name of the Router 1.
•
Router 1 Password: Enter the password of the Router 1.
•
Router 2 User Name: Enter the user name of the Router 2.
•
Router 2 Password: Enter the password of the Router 2.
•
Tunnel Name: Enter a name for this tunnel.
•
Pre-shared Key: IKE uses the Pre-shared Key field to authenticate the
remote IKE peer. Both character and hexadecimal values are acceptable in
this field; e.g.,"My_@123" or "0x4d795f40313233". Note that both sides
must use the same Pre-shared Key.
•
Router 2 WAN IP address: Enter the WAN IP address of Router 2.
•
Router 2 IP by DNS Resolved: Enter the DDNS Domain Name of Router 2 if
it does not have a static IP address for its internet connection.
The router configuration is checked.
6
100