Cisco QuickVPN - PC Administration Manual page 46

Setting Up and Configuring the Router
Setup
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
WINS The Windows Internet Naming Service (WINS) provides name resolution
service (similar to DNS) in Windows networks. If you use a WINS server, enter that
server's IP Address here. Otherwise, leave this blank.
Static IP Mapping
Static IP Mapping is used to bind a specific IP address to a specific MAC address.
This helps external (WAN) users to access LAN servers that are advertised
through NAPT port forwarding. You can define up to 50 entries.
Static IP Address Enter the IP address to be mapped.
MAC Address Enter the MAC address to be mapped.
Host Name Enter the host name to be mapped.
Click Add to create the entry and add it to the list. To modify an existing entry,
select it from the list, edit the appropriate field(s), and then click Modify. To delete
an entry, select it and click Remove.
IPv6
IPv6 Address If your network has implemented IPv6, enter the proper IPv6
address in this field.
Prefix Length Enter the appropriate IPv6 prefix length.
Router Advertisement
addresses automatically using the IPv6 prefix broadcast by the router.
DHCPv6
To enable the DHCP v6 feature, select Enable. To disable DHCP v6, select Disable.
Lease time Enter the lease time in minutes.
DHCP6 address range start
DHCP6 address range end
Primary DNS Enter the Primary DHCP v6 DNS server address.
Secondary DNS Enter the Secondary DHCP v6 DNS server address.
Click Save Settings to save your changes, or click Cancel Changes to undo your
changes.
Enabling this option allows IPv6 hosts to configure their IP
Enter the starting DHCP v6 IP address.
Enter the ending DHCP v6 IP address.
5
39