Firewall > Port Range Triggering - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the Router
Firewall
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
Firewall > Port Range Triggering
Firewall > Port Range Triggering
Application Name Enter the name of the application you wish to configure.
Triggered Range For each application, list the triggered port number range.
These are the ports used by outgoing traffic. Check with the Internet application
documentation for the port number(s) needed. In the first field, enter the starting
port number of the Triggered Range. In the second field, enter the ending port
number of the Triggered Range.
Forwarded Range For each application, list the forwarded port number range.
These are the ports used by incoming traffic. Check with the Internet application
documentation for the port number(s) needed. In the first field, enter the starting
port number of the Forwarded Range. In the second field, enter the ending port
number of the Forwarded Range.
Enabled Click the Enabled checkbox to enable port range triggering for the
relevant application.
Click Save Settings to save the settings you have entered. Click Cancel Changes
to cancel any changes you have entered.
5
55