Chapter 5: Setting Up And Configuring The Router - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the Router
Cisco RVS4000 4-Port Gigabit Security Router with VPN Administration Guide
This chapter includes information for configuring the following router functions:
•
Setup, page 25
•
Firewall, page 44
•
ProtectLink, page 56
•
VPN, page 57
•
QoS, page 65
•
Administration, page 70
•
IPS, page 78
•
L2 Switch, page 82
•
Status, page 91
The router is configured using the built-in web-based configuration utility. To
access the web-based configuration utility of the router, open your web browser
and enter http://192.168.1.1 into the Address field. Press the Enter key and the
Login window will appear.
Address Bar of Web Browser
The default IP address is 192.168.1.1. If the IP address has been changed
NOTE
using DHCP or via the console interface, enter the assigned IP address
instead of the default.
5
24