McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 233

Initially, the utility comes configured to connect only to the Network
Associates FTP site. You can add as many different sites as you need, and
alter the order in which AutoUpdate tries to connect to them, from this
dialog box. The utility will try each site in turn, starting from the top of
the list, until it successfully downloads new files or determines that no
new files exist.
3. From here, you can:
• Add a new site. Click Add to open the Automatic Update Properties
dialog box (Figure 7-2 on page
for your new site, see
Figure 7-2. Automatic Update Properties dialog box -
• Change definitions for an existing update site. Select a site shown in
the update site list, then click Edit to open the Automatic Update
Properties dialog box
make, then click OK to save them and return to this dialog box. To
see descriptions and instructions for configuring the available
options, see
• Remove an existing site from the update site list. Select a site shown
in the update site list, then click Delete.
• Specify the order in which the AutoUpdate utility should connect to
the listed sites. To position a site so that the utility tries it earlier,
select the site, then click Move Up. To designate a site as lower in
priority, select the site, then click Move Down.
Updating and Upgrading VirusScan Software
233). To learn how to specify options
"Configuring update options" on page
Update Options page
(Figure 7-2). Make the changes you want to
"Configuring update options" on page
235.
235.
User's Guide 233