McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 43

10. Choose the option you prefer, then click Next> to continue.
If you chose Custom Setup, you'll see the panel shown in
Otherwise, skip to
11. Choose the VirusScan components you want to install. You can:
• Add a component to the installation. Click
component name, then choose
local hard drive from the menu that appears. To add a component
and any related modules within the component, choose
This feature, and all subfeatures, will be installed on local
hard drive instead. You can choose this option only if a component
has related modules.
• Remove a component from the installation. Click
component name, then choose
available from the menu that appears.
Š
NOTE: The VirusScan Setup utility does not support the other
options shown in this menu. You may not install VirusScan
components to run from a network, and VirusScan software
has no components that you can install on an as-needed basis.
You can also specify a different disk and destination directory for the
installation. Click Change, then locate the drive or directory you want to
use in the dialog box that appears. To see a summary of VirusScan disk
usage requirements relative to your available hard disk space, click Disk
Usage. The wizard will highlight disks that have insufficient space.
Step 13 on page 44 to continue with your installation.
Figure 2-7. Custom Setup panel
Installing VirusScan Software
beside a
This feature will be installed on
This feature will not be
User's Guide
Figure 2-7.
beside a
43