Using VirusScan Utilities
Choosing VirusScan control panel options
The control panel consists of two tabbed property pages that set out its
options.
To choose your options, follow these steps:
1. Open the control panel, then click the Service tab.
2. To stop all active VirusScan components, click Stop.
3. Select the Load on startup checkbox in the VirusScan Service area to
278
McAfee VirusScan Anti-Virus Software
Figure 9-1. VirusScan control panel - Service page
If all VirusScan components that normally load into memory—the
Console and the VShield scanner, normally—are inactive, this button
will read Start. Click it to reload inactive VirusScan components.
You can also restart the VirusScan application and the Console
individually from the Windows Start menu.
start the VirusScan management service (AVSYNMGR.EXE) as soon as
you start your computer.
The management service oversees all communications between
VirusScan program components, determines which components must
load to accomplish program tasks, and allows you to start or stop all
program components at once.