McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 154

Using the VShield Scanner
Preventing the scanner from starting automatically
If you do not want the VShield scanner to start automatically, you can use the
VirusScan control panel to prevent it from doing so.
Follow these steps:
1. Click Start in the Windows taskbar, point to Settings, then choose
2. Locate and double-click the VirusScan control panel to open it.
3. Click the Components tab.
4. Clear the Load VShield on startup checkbox at the top of the
5. Click OK to close the control panel.
The VShield scanner will not stop or unload at this point, but it will not start
when you next start your computer.
Stopping the VShield scanner completely
You can stop the VShield scanner completely—that is, deactivate it and
remove it from memory—in any of three ways. Once you stop the scanner, you
can reactivate it only by restarting it or restarting your computer. To learn how
to start or restart the scanner, see
on page
Method 1: Use the VShield shortcut menu
Follow these steps:
1. Right-click the VShield icon
2. Choose Exit.
154 McAfee VirusScan Anti-Virus Software
Control Panel.
Components property page.
88.
shortcut menu.
The VShield scanner will stop and unload itself from memory. The
VShield icon will disappear from the Windows taskbar.
"Enabling or starting the VShield scanner"
in the Windows system tray to display its