McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 158

Using the VShield Scanner
Method 3: Use the VShield Properties dialog box
Follow these steps:
1. Right-click the VShield icon
2. Point to Properties, then choose a module name to open the VShield
3. For each module that you want to disable, click the corresponding icon
4. Clear the Enable checkbox at the top of each module page.
158 McAfee VirusScan Anti-Virus Software
the VShield shortcut menu.
Properties dialog box
Figure 4-45. VShield Properties dialog box
along the left side of the dialog box, then click the Detection tab.
As you do so, the scanner will disable that module and make all of the
configuration options in that page unavailable. Depending on which
modules you disable, the VShield icon will display a different state.
If you disable all of its modules, the scanner will display
Windows system tray, unless you clear the Show icon in the taskbar
checkbox in the System Scan Detection property page. In that case,
VShield will not display an icon in the system tray.
Using this method to disable the module makes the disabled state the
module's "default" state. If you later use the shortcut menu to enable the
module, it will stay enabled only until you restart your VirusScan
software or your computer.
in the Windows system tray to display
(Figure 4-45).
in the