McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 90

Using the VShield Scanner
Enabling the VShield scanner and its modules
Once you have all VShield components installed, you can use any of four
methods to enable them, in various combinations.
Š
Method 1: Use the VShield shortcut menu
Follow these steps:
1. Right-click the VShield icon
2. Point to Quick Enable.
3. Choose one of the module names shown without a check mark. Module
Depending on which combination of modules you enable, the VShield icon
will display a different state. To learn what the different icon states mean, see
"Understanding the VShield system tray icon states" on page
Method 2: Use the System Scan Status dialog box
Follow these steps:
1. Double-click the VShield icon
90 McAfee VirusScan Anti-Virus Software
NOTE: Enabling a module means activating it and loading it into your
computer's memory for use. The VShield scanner can start and remain
active in memory even with none of its modules enabled.
shortcut menu.
names that have a check mark beside them are active. Those without a
check mark are inactive. If you use this method to enable a module, it
remains enabled until you restart your VirusScan software or your
computer. At that point, its state will depend on whether you have
enabled or disabled the module in the VirusScan Properties dialog box.
System Scan Status dialog box
Figure 4-1. System Scan Status dialog box
in the Windows system tray to display its
in the Windows system tray to open the
(Figure 4-1).
92.