McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 89

If your computer runs Windows NT Workstation v4.0 or Windows 2000
Professional, the VShield scanner loads as a Windows NT service called
McShield, which you can see in the Windows Services control panel.
Š
NOTE: McAfee recommends that you do not start or stop the McShield
service from the Windows control panel. Instead, you can stop and
restart the scanner from the provided VirusScan control panel. To learn
more about how to use the VirusScan control panel, see
the VirusScan control panel" on page 277
If your computer runs Windows 95 or Windows 98, the scanner loads in a way
that mimics a Windows service on that platform. This service is not visible in
the Windows user interface.
Starting the scanner automatically
If the VShield scanner does not start automatically, you can set it to do so in
the VirusScan control panel.
Follow these steps:
1. Click Start in the Windows taskbar, point to Settings, then choose
Control Panel.
2. Locate and double-click the VirusScan control panel
3. Click the Components tab
Figure 4-1. VirusScan control panel - Components page
4. Select the Load VShield on startup checkbox at the top of the
Components property page.
5. Click OK to close the control panel.
(Figure 4-1).
Using the VShield Scanner
"Understanding
to open it.
User's Guide 89