McAfee AVDCDE-AA-AA - Active Virus Defense Suite User Manual page 232

Updating and Upgrading VirusScan Software
Property pages in the Automatic Update Properties dialog box control the
options for your update task. You can click each tab in turn to configure this
task.
To display the Automatic Update dialog box, follow these steps:
1. Double-click the AutoUpdate task in the Console task list to open its
2. Click Configure.
232 McAfee VirusScan Anti-Virus Software
Task Properties dialog box (see
To learn how to set a password for this task, see
AutoUpgrade and AutoUpdate tasks" on page
schedule for the task, see
The Automatic Update dialog box appears with the Update Sites
property page selected (see
Figure 7-1. Automatic Update dialog box - Update Sites page
Here, the AutoUpdate utility lists the sites from which it will download
new .DAT files. It also reports each site's current status as Enabled or
Disabled. A site is enabled if you have selected the Enabled checkbox in
the Automatic Update Properties dialog box. A site is disabled if you
clear this checkbox. This designation does not change whether or not the
AutoUpdate utility can connect with the site.
Figure 6-4 on page
"Enabling tasks" on page
Figure 7-1 on page
199).
"Working with the
199. To learn how to set a
204.
232).