Figure 69. Sys Commands - Asus GIGAX2024 User Manual

GigaX2024/2048 L2 Managed Switch User Manual
If you put the contact description in the contact description field, the switch
contact will change to the new one.
[System Location]
Displays the physical location of the switch. This is an RFC-1213 defined MIB
object in System Group, and provides the location information on the managed
node.
CLI command: sys info location <system location description>
Type in the location description in the location description field to change the
location.
[VLAN ID]
Displays the VLAN ID for the switch. It is necessary to be within the same VLAN
for management usages.
CLI command: net interface vlan sw0 <VLAN ID>
[DHCP Client]
Enable DHCP to get a dynamic IP address, or disable DHCP to specify a static
IP address. If you enable DHCP, you can renew or release the IP address for the
switch, and use show command to display the dynamic IP address.
CLI command: net interface dhcp sw0 <enable/ disable/ renew/ release/
show>
[IP Address]
Displays the static IP address for the switch. This IP address is used for
manageable purpose, i.e.; network applications such as, http server, SNMP
server, ftp server , telnet server and SSH server of the switch are all using this
58

Figure 69. SYS commands