Figure 44. Sys Commands - Asus GigaX2024X - GigaX 2024X Switch User Manual

GigaX Series L2 Managed Switch User's Guide

Figure 44. SYS commands

[VLAN ID]
Display the VLAN ID for the switch. It is necessary to be within the same VLAN
for management .
CLI command: net interface vlan sw0 <VLAN ID>
[DHCP Client]
Enable DHCP to get a dynamic IP address, or disable DHCP to specify a
static IP address. If you enable DHCP, you can renew or release the IP
address for the switch, and use show command to display the dynamic IP
address.
CLI command: net interface dhcp sw0 <enable/ disable/ renew/ release/
show>[IP Address]
Displays the static IP address for the switch. This IP address is used for
manageable purpose, i.e.; network applications such as, http server, SNMP
server, ftp server, telnet server and SSH server of the switch are all using this
IP address.
CLI command: net interface ip sw0 < IP address> <netmask>
78