Snmp - Asus GIGAX2024 User Manual

GigaX2024/2048 L2 Managed Switch User Manual
[DHCP Snooping is]
Enable or disable DHCP snooping on specific VLAN.
CLI command: l2 dhcpsnoop enable <vlan id list>
CLI command: l2 dhcpsnoop disable <vlan id list>
[Add/Remove Trusted Port]
Allows user to add or remove specific ports for DHCP snooping.
CLI command: l2 dhcpsnoop add <port list>
CLI command: l2 dhcpsnoop remove <port list>
[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 dhcpsnoop retrieve

5.3.4 SNMP

[Community Name] [Set]
A community entry contains a community description string and a set of
privileges. Get privilege are turned on by default, and user can specify whether
to give it the Set Privilege while create a new entry.
CLI command: snmp community add
New community string: <new community string>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for ʻyesʼ; n for ʻnoʼ>
CLI command: snmp community set
User can modify a community entry in the table by reassigning its community
string and privileges.
Community entry (table index): <entry id to config>
Community string (old community string): <new community string>
This action will modify all hosts with community string from ʻold communityʼ to
ʻnew communityʼ.
Are you sure? (y/n): [y] <y for ʻyesʼ; n for ʻnoʼ>
Get privileges: [y, always turn on by default]
Set privileges? (y/n): [n] <set privilege, y for ʻyesʼ; n for ʻnoʼ>
68