Asus GIGAX2024 User Manual page 95

Allows users to modify a match criterion of a class. If users input <new dscp
list>, <new acl id> will not display, and <new acl id> force to 0.
CLI command: qos class modify <class id(1-56)>
dscp (old DSCP): <new dscp list>
acl id (old ACL ID):<new Acl ID>
[Remove]
Allows users to delete a class by indicating the class ID. Users can delete all
classes by inputting ʻ*ʼ.
CLI command: qos class delete <class id(1-56): * for all classes>
[Policy Name]
[Add]
Creates a new policy with specifying a unique policy name.
CLI command: qos policy new <policy name>
[Remove]
Allows users to remove a policy by indicating the policy ID. Users can remove all
policies by inputting ʻ*ʼ.
CLI command: qos class remove <policy id(1-56): * for all policies>
[Edit]
[Class ID]
[DSCP]
[Traffic Rate]
[Traffic Burst Size]
[Exceed Action][None/Drop/DSCP]
[Exceed DSCP]
[Add]
Allows users to add a new policy action by specifying a policy ID and class
ID. A policy only can have 6 policy actions. If users do not input traffic rate, all
of below prompts will not display. If users input ʻnoneʼ or ʻdropʼ in exceed act,
<exceed dscp> will not display.
GigaX2024/2048 L2 Managed Switch User Manual
83