Filters Commands - Asus GIGAX2024 User Manual

GigaX2024/2048 L2 Managed Switch User Manual

5.3.5 Filters Commands

[New]
Creates a new filter set with specifying a unique ACL ID and its description
name.
CLI command: filter set new <acl id> <acl name>
[Remove]
User can delete a filter set by indicating the ACL ID.
CLI command: filter set delete <acl id>
[Edit]
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Add]
User can add a new MAC address rule associated to a filter set. These filter rule
works with ICMP, TCP or UDP protocols with action of permit or deny. User can
also specify the MAC address (source or destination) of the filter rule by using
CLI command dstmac and srcmac.
CLI command: filter rule new <set id> <rule id> <protocol: ICMP/TCP/UDP/
any> <action: permit/deny>
CLI command: filter rule dstmac <set id> <rule id> <type: (any/[mac
address])>
CLI command: filter rule srcmac <set id> <rule id> <type: (any/[mac
address])>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]
74