Port Status; Figure 52. Port Configuration - Asus GIGAX2024 User Manual

GigaX2024/2048 L2 Managed Switch User Manual
aging mechanism is only effective for dynamic secure MAC addresses. If the
time is equal to 0, the aging mechanism is disabled for this port.
Aging Type: set the aging type. To determines the action when the dynamic
secure MAC addresses are aged out. Two types of aging are supported for
each port:
a) Absolute: the secure addresses on the port are deleted after the
specified aging time.
b) Inactivity: the secure addresses on the port are deleted only if there is
no data traffic from the secure source MAC address for the specified time
period.
Select the corresponding port number and configure the port setting, then click
on the Modify button. The field you changed will update the content of the
display window. Click OK to make the setting effective immediately. Click Reload
to refresh the settings to current value. To save configuration permanently,
please go to Save Configuration page, then click on Save.

4.8.4.2 Port Status

This page is display the port security information for all ports. The information of
the display window is as follows:
Port: port number.
Status:
a) NoOper: this indicates port security on the port is configured to disabled.
b) SecureUp: this indicates port security is operational.
c) SecureDown: this indicates port security is not operational. This
happens when port security is configured to be enabled but could not be
operational due to certain reasons such as conflict with other features.
d) Restrict: this indicates that the port occurs port security violation when
42
Figure 52. Port Configuration