[CoS Queue ][Weight]
Set the scheduler mode. The weight delay of queues only effective for weighted
round robin and bounded delay. The range of weight delay is 1-255.
CLI command: l2 cos sched <mode (1:strict 2:weighted round robin 3:
bounded delay)> <Q1-Q4: weight delay>
[Priority] [CoS Queue]
Allows user to map the CoS priority (with range of 0-7) for a buffer queue (total
of 4, with queue ID of 1-4).
CLI command: l2 cos map <queue id (1-4)> <cos (0-7)>
5.4 Miscellaneous Commands
sys time uptime: show the time since the system boot up.
sys time date: show the current date and time
sys time settime: set the current time
sys files config backup: backup configuration files
sys files config default: restore factory default configuration files
sys baud: set console baud rate
net ping: ping remote host
net route show: display the entries in the routing table
GigaX2024/2048 L2 Managed Switch User Manual
85