Asus GIGAX2024 User Manual page 75

**For GigaX 2048
[Mirror] [Mirror 1/Mirror 2]
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch. User can create a maximum of two
mirroring ports on the switch. One is associated to a SoC., which means mirror
ID 1 is dedicated to SoC 0, and mirror ID 2 is dedicated to SoC 1. Therefore,
only port number 1-24 can be assigned to mirror ID 1 as monitor port, ingress
port(s), or egress port (2). Only ports 25-48 can be assigned to mirror ID 2 as
mirroring ports.
CLI command: l2 mirror create <mirror id (1 or 2)> <monitor port no>
<enable/disable>
CLI command: l2 mirror ingress <mirror id (1 or 2)> <port list>
CLI command: l2 mirror egress <mirror id (1 or 2)> <port list>
CLI command: l2 mirror remove <mirror id (1 or 2)> <ingress/egress> <port
list>
**For GigaX 2024
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command: l2 mirror create <monitor port no> <enable/disable>
CLI command: l2 mirror ingress <port list>
CLI command: l2 mirror egress <port list>
CLI command: l2 mirror remove <ingress/egress> <port list>
[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 mirror retrieve
[Show Group]
Displays the static multicast groups that are presented in the multicast group
table.
CLI command: l2 mcast show
GigaX2024/2048 L2 Managed Switch User Manual
63