[Rule List]
Displays the filter set and filter rule configurations.
CLI command: filter rule show <set id> <rule id>
Attach
Attach a filter set to ingress/egress ports to enable the filter function.
[Filter ID]
Displays the filter configurations.
CLI command: filter show
[Ingress Port]
Applies a filter set to an ingress port.
CLI command: filter apply ingress <filter set id> <any/none/[port number]>
[Egress Port]
Applies a filter set to an egress port.
CLI command: filter apply egress <filter set id> <any/none/[port number]>
[Reload]
Restores the previous saved settings from configuration file.
CLI command: filter retrieve
5.3.6 Security Commands
[Reauthentication]
Allows user to enable or disable periodic reauthentication.
CLI command: security dot1x bridge reauth <enable / disable>
[Reauthentication Time]
Allows user to set up the reauthentication time.
CLI command: security dot1x bridge reauthtime <reauthentication time
(1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command: security dot1x bridge authmeth <type (1:local 2:radius)>
GigaX2024/2048 L2 Managed Switch User Manual
77