During POST, all controllers in the server are initialized one at a time in the current boot order sequence.
If a controller is connected to one or more hard drives, a message appears during the initialization
process for that controller, prompting you to start ORCA.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
The ORCA main menu appears, enabling you to do the following:
Create, view, or delete a logical drive
o
Enter an SAAP license key
o
Creating a logical drive with ORCA
Power up the server.
1.
POST runs.
During POST, all controllers in the server are initialized one at a time in the current boot order sequence.
If a controller is connected to one or more hard drives, a message appears during the initialization
process for that controller, prompting you to start ORCA.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
("Creating a logical drive with
("Installing a license key with
ORCA" on page 11)
ORCA" on page 12)
Option ROM Configuration for Arrays 11