•
Physical drive error logs
ACU Diagnostics never collects information about the data content of logical drives. The diagnostic report
does not collect or include the following:
•
File system types, contents, or status
•
Partition types, sizes, or layout
•
Software RAID information
•
Operating system device names or mount points
Performing a Diagnostics task
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 30)."
If ACU is already open, click the Diagnostics/SmartSSD tab.
The Diagnostics/SmartSSD screen appears with the following selections:
View SmartSSD Wear Gauge Report
o
Generate SmartSSD Wear Gauge Report
o
Run Array Diagnostic Reports
o
For this example, use the diagnostic reports selection.
Select Run Array Diagnostic Reports.
2.
The array diagnostic report screen appears.
Select a device or devices from the Report Contents panel.
3.
The Available Tasks panel appears. For more information, see "Diagnostics tasks (on page 46)."
HP Array Configuration Utility 47