Acu Scripting Warning Messages; Acu Scripting Error Messages - HP ProLiant DL360p Reference Manual

<!ELEMENT Drive ( ALL | #PCDATA ) >
<!ELEMENT OnlineSpare ( YES | NO | #PCDATA ) >
<!ELEMENT LogicalDrive ( Raid, Repeat | Size, Sectors, StripeSize,
ArrayAccelerator? ) >
<!ATTLIST LogicalDrive ID PCDATA #REQUIRED >
<!ELEMENT ArrayAccelerator ( ENABLE | DISABLE ) ENABLE >
<!ELEMENT Raid (0 | 1 | 1ADM | 10 | 10ADM | 4 | 5 | 6 | ADG | 50 | 60)
>
<!ELEMENT Repeat ( MAX | #PCDATA ) >
<!ELEMENT Sectors ( 32 | 63 ) >
<!ELEMENT Size ( MAX | #PCDATA ) MAX >
<!ELEMENT StripeSize ( 8 | 16 | 32 | 64 | 128 | 256 | 512 ) >
<!ELEMENT Initiator ( HBA_WW_ID, ConnectionName?, HostMode? ) >
<!ELEMENT HBA_WW_ID ( #PCDATA ) >
<!ELEMENT ConnectionName ( #PCDATA ) >
<!ELEMENT HostMode ( #PCDATA ) >
]>

ACU scripting warning messages

Warning Warning message
code
License key is already installed
4000
Clear configuration command failed -
4001
configuration is already cleared
Chassis name is already set to this value
4002
One or more controller commands were
4003
skipped because the controller is not
configured
Using Repeat function
4004
The system must be rebooted for the firmware
4005
flash to complete
Unable to set the array accelerator for this
4006
volume. The cache board may be missing or
have a bad status, or the controller may not
support a cache

ACU scripting error messages

Error code Error message
—
0
Comment or clarification
The input file specified a license key. However, a
license key is already installed on the controller.
The -reset option was used on a controller that
does not have a configuration.
The chassis name is already set to the supplied
value. The command is ignored.
Certain commands require that the controller be
configured before they can be sent to the controller.
Some commands have been ignored because the
Repeat parameter has been specified in the input
file.
A controller has been flashed with new firmware.
The new firmware requires a reboot to take effect.
The controller may not support a cache (for
example, some Software RAID controllers) or the
cache may be missing or defective.
Comment or clarification
No error exists. The program completed
HP Array Configuration Utility 91